Firma Agent is designed as a Multi-Purpose Bonding Agent most suitable for modifying ordinary Portland cement compositions. It is a bluish water-based emulsion admixture has an exceptionally high bonding strength when combined with ordinary Portland cement plaster.

Benefits

• Eliminated the application of 'Spatter Dash' or commonly call as pre-grout / stamping / chopping for shear wall plastering
• High bonding performance even laying tiles on plywood, glass or other unconventional surfaces
• Enormous time saving, cost saving over conventional resurface work system
• Simplicty - add only OPC & WFS for installing Porcelain Tiles

Used in Tilling Work

• Lay all types of tiles, marble and stone on floor and wall
• Renovation work lay tiles on tiles
• Lay tiles on wooden surfaces (plywood, cement board)
• Inconventional surfaces : Lay tiles on glasses

Used to Bond Old & New Concrete

Directions to Use

1. Identify one layer or two layers of Firma Agent 298 for application
2. Clean working surface from excessive dust
3. Apply Firma Agent 298 on the working surface using a brush/roller on its designated area
4. Allow at least 20 minutes of drying time before proceed working on the surface coated with Firma Agent 298
5. Effective time - the surface area coated with Firma Agent 298 may be left for up to seven (7) days before the actual laying of tiles or other applications
6. It is necessary to apply a new coat of Firma Agent 298 over the previous coating if passed the 7 Days Effective Time